We will bring you our other products very soon.
We will bring you our other products very soon.
Thank you for buying the Linuche Cordless lamp. Hope it brings you happiness…
Hold the lamp head by the handle at the top.
With the other hand hold the stem, that comes out of the box, from the middle.
Fit the top magnet part of the stem into the socket underneath the lamp head.
Now the lamp is ready for use.
It can also be used hanging without the stem hung from the handle.
You could turn on and off the Linuche Cordless two-station lamp by pressing the button located underneath the lamp head and adjust the light level by pressing this same button.
1. Pressing the button once turns on the inner station lights. Holding the button pressed will adjust the light level for the inner station.
2. Pressing the button again will turn off the inner station lights and turn on outer station lights. Holding the button pressed will adjust the light level for the outer station.
3. Pressing the button once again will turn on both inner station and outer station lights. Holding the button pressed will adjust the light level for both stations together.
4. Press the button to turn off the lamp.
Connect the wide end of the cable, that comes out of the box, to the adapter.
Insert the narrow end of the cable into the Micro-USB port underneath the lamp head.
Ensure the cable’s narrow end fits correctly and fully into the Micro-USB port.
Finally, start the charging process by plugging the adapter into the wall outlet.
Red light which appears during charging turns green when charging is completed.
